Bypass Screen Locks using EFT Dongle (When to use Make Kernel & When Make Recovery)
Results 1 to 4 of 4

Thread: Bypass Screen Locks using EFT Dongle (When to use Make Kernel & When Make Recovery)

  1. #1
    Super Moderator Ghazwan.Eid's Avatar
    Join Date
    Apr 2016
    Location
    Syria
    Posts
    43
    Thanks Meter
    51

    Bypass Screen Locks using EFT Dongle (When to use Make Kernel & When Make Recovery)

    Hello EFT Dongle Users,
    Today we are going to clarify for you,
    How to use our two methods (Make Kernel & Make Recovery) to reset screen lock ...
    Also we will clarify when and how to use Make kernel with boot.img and when and how to use Make recovery with recovery.img ..
    ------------------------------------------------------
    First of all, you have to know that:
    A- Make kernel method is used with old Android Versions Like Android 6.0 and lower with no data encryption ..
    although it can be used with New Devices with Android 7.0 but not data encrypted like ( S6 - Note 5 & J510 Varieties )
    B- Make recovery method is used with devices with Android 7.0 and above with Data encrypted !
    So to make it easier for you look at this:
    Make Kernel conditions :
    1- Android 6.0 or lower
    2- No data encryption
    3- Some Android 7.0 Devices with no data encryption like S6-Note5-J510
    Make Recovery conditions :
    1- Android 7.0 or above
    2- Data encrypted like G610-G935 ...etc

    -----------------------------------------------------------
    How to Make Kernel to reset screen lock using boot.img :
    1- Get boot.img with same security and OS as in phone , you can download from EFT Dongle support HERE or extract from any firmware using 7zip
    2- Navigate to Make Kernel section in EFT Software
    3- Connect any device with adb enabled
    4- Choose the boot.img you previously extracted or downloaded !
    5- Hit Make kernel remove screen lock and wait till Done
    6- Navigate to EFT section and choose boot.eft and flash it
    7- Now your phone is unlocked without data loss

    Notice : In some cases, after done steps before the phone started with a message asked to enter a password..
    (it happened when we flash boot from not same firmware as in phone )
    Do not worry Just flash system.img from same firmware you get the boot from and phone will boot-up successfully !

    --------------------------------------------------------------------
    How to Make Recovery to reset screen lock using recovery.img :
    1- Get recovery.img with same security and OS as in phone
    2- Navigate to Make recovery Section
    3- Connect and device with adb enabled
    4- Choose recovery.img you previously get
    5- Hit Make recovery to reset screen lock and wait till Done
    6- Navigate to EFT section and flash recovery.eft.fix.eft
    7- Now your phone is unlocked and you can backup your files and re-flash your phone because this operation aims to save your data and we stopped some services in the phone and need to be flashed to get to work again !

    Notice : Some times after flashing recovery.eft.fix.eft the phone stuck at logo so all you need to do is flashing the stock recovery.img and the phone will boot normally and unlocked also !

    -----------------------------------------------------------------
    Hope this was helpful for you guys ,
    also feel free to contact us any time on our support page Facebook.com/eft dongle
    or open a new thread explaining your problem and wait for our staff !
    ---------------------------------------------------------------------
    Best Wishes
    Easy Team

  2. The Following 5 Users Say Thank You to Ghazwan.Eid For This Useful Post:


  3. #2
    Junior Member
    Join Date
    Mar 2018
    Posts
    1
    Thanks Meter
    0
    PLEASE for my list device data encrypted !!!

  4. #3
    Junior Member
    Join Date
    Jan 2018
    Posts
    3
    Thanks Meter
    0
    plz tell me this method work if FRP on samsung j710f or j500h or g60f or we need first frp off then do this agian

  5. #4
    Junior Member
    Join Date
    Dec 2017
    Location
    ARGENTINA
    Posts
    1
    Thanks Meter
    0
    interesante a probar!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 13
    Last Post: 23-02-2018, 06:00 PM
  2. Replies: 0
    Last Post: 08-12-2017, 12:40 PM
  3. Replies: 0
    Last Post: 02-12-2017, 12:02 PM
  4. Replies: 0
    Last Post: 28-10-2017, 03:56 PM
  5. Replies: 0
    Last Post: 18-05-2017, 12:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •