WiKo Lenny Dead Recover By Kashi Lucky
Results 1 to 1 of 1

Thread: WiKo Lenny Dead Recover By Kashi Lucky

  1. #1
    Crazy Poster
    Join Date
    May 2017
    Location
    Pakistan
    Posts
    76
    Thanks Meter
    192

    WiKo Lenny Dead Recover By Kashi Lucky

    WiKo Lenny Dead Recover With CM2Tool

    Flash Tutorial SPTool
    BRAND : WIKOMODEL : LENNY
    CPU : MT6572


    1 : FAST INSTALL MT65xx USB Driver Your PC
    2 : OPEN SP Flash Tool 5.1352.01
    3 : Click SCATTER LOADING
    4 : Add MT6572 Android Scatter txt
    5 : NOTE : Untick now " preloader_s5201ap.bin " file
    6 : Click Downlaod & Start Button
    7 : reconnect Battery your phone or Press Volume- and Connect USB Cable
    8 : Now Flash/Update Start
    9 : Wait You Are Done



    Now Check

    1. Power Off Phone , Remove battery , Insert back

    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 197 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A483447326111011F3811B692F9
    Initialize Memory ...
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , a2G4
    [eMMC] : FLASH_CID : 90014A483447326111011F3811B692F9
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID : 0xCD132EE0A56DA1673FD9BD44E51B65AC
    INT RAM : 0x00020000
    EXT RAM : 0x20000000 [512 MiB]
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    [AP] : Initial info read Ok!

    Brand : WIKO
    ProdName : s5201ap
    ProdModel : LENNY
    Device : s5201ap
    AndroidVer: 4.4.2
    MTKxCPU : MT6572
    MTKxPRJ : ALPS.KK1.MP7.V1

    MODEM :
    BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_1_wg_n

    EXTRA :
    LCD [0] : ili9806e_fwvga_dsi_vdo_txd
    LCD [1] : hx8379c_fwvga_dsi_vdo_tcl
    LCD [2] : ili9806e_fwvga_dsi_vdo_dj
    LCD [3] : ili9806e_fwvga_dsi_vdo_glass
    LCD Res : 854x480
    TOUCH [0] : GT9XX
    CAM [0] : ov5645_mipi_yuv
    CAM [1] : ov5646_mipi_yuv
    CAM [2] : sp0a19_yuv
    CAM [3] : gc0329_yuv
    CAM [4] : hi258_mipi_yuv
    MODEM : mt6572_s5201ae_wiko_hspa_gemini
    LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG th_TH pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB ur_PK fa_IR hdpi -sw600dp -sw720dp

    Done!
    Elapsed: 00:00:13
    Reconnect Power/Cable!


    Scatter Load Ok , BaseBand : MT6572 , Project : s5201ap , Storage : EMMC
    Files found : 11 , Set to Flash : 10
    Ready to Flash!

    Operation : Flash [ v1.58 ]

    ======= Flash
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 197 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A483447326111011F3811B692F9
    Initialize Memory ...
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , a2G4
    [eMMC] : FLASH_CID : 90014A483447326111011F3811B692F9
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID : 0xCD132EE0A56DA1673FD9BD44E51B65AC
    INT RAM : 0x00020000
    EXT RAM : 0x20000000 [512 MiB]
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    ScatCFG : BaseBand : MT6572 , Project : s5201ap , Storage : EMMC
    Setting : Flash Pre-Erase : Off ( Write Flash Only )
    Setting : AFF verify : Enabled
    Setting : HW verify : Enabled

    BL : Check HW compatibility
    BL : BBID supported by BootLoader!
    BL : Skip checking by User request!

    BL : BatteryLevel : 3710 mV
    BL : BatteryLevel Ok

    SecCfg Passed , 1799
    BMT remark not need. Will skip

    Preloader Download skipped by user request!
    PartCount : 0012
    Update PMT by user request
    Repartition Done!
    Use FLN Mode

    Processing : Flash Write
    Flash now : MBR
    Image Flash Ok
    Flash now : EBR1
    Image Flash Ok
    Flash now : UBOOT
    Image Flash Ok
    Flash now : BOOTIMG
    Image Flash Ok
    Flash now : RECOVERY
    Image Flash Ok
    Flash now : SEC_RO
    Image Flash Ok
    Flash now : LOGO
    Image Flash Ok
    Flash now : ANDROID
    Image Flash Ok
    Flash now : CACHE
    Image Flash Ok
    Flash now : USRDATA
    Image Flash Ok
    Flash Write Done, time used : 00:03:06

    Processing : Verify
    Verify Passed : MBR
    Verify Passed : EBR1
    Verify Passed : UBOOT
    Verify Passed : BOOTIMG
    Verify Passed : RECOVERY
    Verify Passed : SEC_RO
    Verify Passed : LOGO
    Verify Passed : ANDROID
    Verify Passed : CACHE
    Verify Passed : USRDATA
    Data Verify Done, time used : 00:00:18

    Update Mirror PMT
    Update Done!

    Update RomInfo done

    Done!
    Elapsed: 00:03:42
    Reconnect Power/Cable! :tan:

  2. The Following 2 Users Say Thank You to Kashi Lucky For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 20
    Last Post: 18-03-2018, 05:39 AM
  2. Huawei Honor3c Dead Recover Done by Kashi Lucky
    By Kashi Lucky in forum Huawei Android Based Phones
    Replies: 0
    Last Post: 25-05-2017, 02:12 PM
  3. GFive Tested Firmwares By Kashi Lucky
    By Kashi Lucky in forum Gfive
    Replies: 1
    Last Post: 25-05-2017, 09:51 AM
  4. Redmi 2 dead recover done by cm2!!
    By dilip dhangar in forum Chinese Miracle & PinFinder
    Replies: 1
    Last Post: 24-03-2017, 11:45 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •